Analytically detectable O2, CO, CO2, NO, NO2, NOx, SO2, CXHY, soot, smoke discharge temperature, flue pressure, combustion efficiency and excess air coefficients. You can choose differential pressure, flow speed. The flue gas composition of H2S, H2, HCL, NH3, HC, etc. can be detected after the addition of an optional sensor, e.g., total emissions.
The flue gas analyzer is equipped with a high-power Parther gas cooler and drainage creep gas pump, as well as an electronic detection condensation once the water reaches the drainage limit, automatically activates the worm pump, discharges condensation water, and is well suited for wet gas monitoring and analysis. The instrument is accompanied by a three-tier filter and a particle collection device that effectively filters the smoke and dust particles.
The flue gas analyzer is equipped with a wireless mobile hand-manufacturing device, which operates over an area of approximately 50 metres and is well suited to a serious source of contamination. The operator controls the operating instrument remotely; it avoids on-site contamination by the operator.
The internal high power thin membrane pumps have a maximum vacuum of -60kPa and work at a pneumatic pressure of 20kPa.
Frozen sample flow of 2-3.5 litres/minute to ensure that the sensor is exposed to sufficient flue gas to increase reaction speed. T90 is: O2-15 seconds; CO, NO, NO2, SO2-20~60 seconds
The gas pump offers excellent corrosion resistance and a mean time between failures (MTBF) of 20,000 hours.
Collapse Easy
Do all the operations directly using the OK key. You can only press "OK" twice to start the measurement.
Using a large screen LCD monitor, all measurements are clear. Special function keys change character size to allow easy viewing of the measurements.
The two-purpose, single-charged operation of six consecutive hours is well suited to work on the industrial site.
A self-diagnostic function that automatically alerts in case of failure (e.g. sensor failure, unreliable plug-in contact, excess range, etc.) and indicates the location of the malfunction. It is easy to maintain.
When the concentration of CO is excessive, the airway is automatically disconnected and the sensor is flushed with a back-up gas pump to extend its useful life.
The instruments contain 1,500 data sets and 1GB MMC storage cards, automatically store measurement data and generate EXCEL format files, and the instrument contains high-speed heat-sensitive printers to print measurements at any time.
User-defined storage time, automatic sampling, measurement, storage and printing of averages of measured data and given time periods.
Detectives (high-temperature probes, bend probes, porous probes) and lengths (0.75 m, 1.0 m, 1.5 m, 2.0 m) ensure adaptation to different field test environments.
Certification through T&Uml, Germany; V certification and China Metrology Type Certification (PA 2009-C112).