Industrial process-water monitoring, organised by treatment stage. The original diagram identifies pH, total hardness, conductivity, residual chlorine, chloride, fluoride, turbidity and temperature as monitoring parameters.
- Inlet valve → raw-water tank → raw-water pump
- Sand filtration → carbon filtration → fine filtration
- High-pressure pump → reverse-osmosis membrane → intermediate tank
- Transfer pump → ozone tower → transfer pump → purified-water tank → outlet pump
Inlet water
AquaPH differential pH; AquaCD conductivity; AquaClear low-range turbidity; Chlorine XP residual/total chlorine; 2117XP chloride; 2120XP calcium hardness; 2109XP fluoride.
Purification and filtration
AquaClear low-range turbidity; AquaCD conductivity; Chlorine XP residual/total chlorine; AquaPH differential pH; 2117XP chloride; 2120XP calcium hardness; 2109XP fluoride.
Reverse osmosis
AquaCD conductivity; Chlorine XP residual/total chlorine; AquaClear low-range turbidity; 2117XP chloride; 2120XP calcium hardness; 2109XP fluoride.
Disinfection
AquaOZ ozone analyser; AquaCD conductivity analyser.
View original source diagram (Chinese)
