The flue gas analyzer is easier to handle.

    Do all the operations directly using the OK key. The start-up button will only have to press the "OK" button twice. Select a large screen liquid crystal monitor, with all the results visible. Special feature keys switch to big characters to check the measure results.

    The two-purpose direct flow, with a single charge capable of running consecutively for six hours, is well suited to work on the industrial site. It is self-diagnostic, alerts the health of the disease when it occurs (e.g. sensor failure, impregnability of plugs, excess range, etc.) and points to the area where it occurs.

    When the concentration of CO is excessive, the airway is actively disconnected and the sensor is flushed with a back-up gas pump to extend its useful life. The instruments contain 1,500 data sets and 1GB MMC storage cards, actively store measuring data and generate EXCEL-format files, with high-speed heat-sensitive printers inside the instruments printing the measured data at any time.

    User-defined storage time, active sampling, measuring, storing and printing averages of measured data and given time periods (high temperature probes, bending probes, porous probes) and probes of length (0.75 m, 1.0 m, 1.5 m, 2.0 m) ensure adaptation to different field test environments. Certification through German certification and our measurement kit type (PA 2009-C112).