Use the nitrogen oxides.

Nitrogen oxides detector It integrates electrochemical, catalytic, thermal, infrared, photo-ion, ultraviolet, and other detection principles.

Nitrogen oxides detector Product characteristics:

(1) The introduction of imported electrochemical sensors with high accuracy, speed of response and high repetition;

(2) The analysis process does not require chemical reagents, does not produce secondary contamination and is a non-destructive analysis;

(3) Level III pre-treatment devices: condensation, dust removal, drying;

(4) Have a temperature-moisture compensation algorithm that effectively eliminates temperature-moisture disturbance;

(5) Compensation for interference with nitrogen oxides, nitrogen dioxide, oxygen, etc.;

(6) Use of pump-suction sampling with standard zero-point automatic functionality to eliminate drift resulting from the long-term operation of the system;

(7) Select a 9-inch industrial touch screen display with historical data storage and query functions;

（8） Instrument has ：4-20mA/RS485 Signal Output ， Ethernet Output ， Relay output, etc. ；

(9) Provide features such as on-site data queries, report statistics, data printing, visual display of gas concentrations, types, units, working conditions, data storage times of more than one year, and copying functions, etc.

Use Nitrogen oxides detector It's important to be aware of this:

1. The use of the environment shall be at constant temperatures, wet and under constant pressure; a high temperature and a high humidity can damage the instrument.

2. Prevent instrumentation from falling from heights or being hit by severe vibrations.

3. Please operate and use strictly in accordance with the instructions, which may otherwise result in detections not being performed or equipment being damaged.

4. No storage in an environment containing corrosive gases.

5. If the surface is contaminated after a long period of use, apply clean soft cloths with light water and not with corrosive and hard matter, which may result in a scratch or damage to the surface.

6. Avoiding the use of gas shock sensors above the measured range, which may damage the sensor and human damage is not covered by the warranty.

7. If you charge it, you turn it off.