The installation of the VOC monitor

　　The VOC detector is used to continuously measure toxic and hazardous organic gases in hazardous or industrial environments, and the VOC is a command organic compound, especially for personal safety protection and on-site VOC testing. However, VOC monitors need to be installed, calibrated, calibrated, etc. before they can be used, otherwise VOC measurements cannot be performed. So, what do we have in mind when we install the VOC monitor? Here's the share of the miniscule.

　　VOC monitor

　　The installation of the VOC monitor is as follows:

　　1. The installation of the VOC monitor must be performed by a professional, and it should not be installed close to the steam and fumes.

　　The range of monitoring instrumentation in a specific environment is related to many factors, such as the type of gas detected, direction of wind in the detected environment, wind speed, etc. The range of monitoring we recommend is 6 x 6 square metres.

　　3. When monitoring gases with a smaller weight than air, it is advisable to install the detector at a distance of 0.3 metres from the roof and when monitoring gases with a larger weight than air, it is desirable to install the detector at a distance of 0.3 metres from the ground.

　　4. Installation of two M6-inflated screws at appropriate locations on the wall, based on the distance of the fixed holes of the two detectors, and anchoring of the detector on the wall with an M6 cubic nut and peace cushion.

　　The relevant items of the VOC instrument are shared here, and the industrial applications of the VOC instrument are mainly petroleum refining and petrochemic, manufacture of chemical raw materials and chemicals, manufacture of chemical raw materials, manufacture of synthetic fibres, surface coating, printing, footwear, furniture manufacture, man-made plates manufacture, electronic component manufacturing, textile dyeing, plastics manufacture and plastics manufacture, and domestic services.